Use the distributive method to check the product
Split 60 into 50 + 10. Multiplying each part by 24 and adding the partial products is a separate, easy-to-audit route to the same answer.
- 1.24 × 50 = 1,200.
- 2.24 × 10 = 240.
- 3.1,200 + 240 = 1,440.
What is 24 times 60?
24 times 60 is 1,440.
Worked out below step by step, with a table of related values and a live calculator so you can change the numbers.
Answer
1,440
24 × 60
Answer
Step-by-step working
- 1. Set up the multiplication: 24 × 60.
- 2. Multiply the two numbers together.
- 3. The answer is 1,440.
Check it: 1,440 ÷ 60 = 24, the first number again.
Formula
answer = first number × second number
Multiplication is repeated addition. Swapping the two numbers gives the same product.
Understanding 24 times 60
Multiplication combines 24 equal groups of 60, or 60 equal groups of 24. That repeated scaling gives the product 1,440.
The operation is useful for totals, repeated quantities, rectangular area and scale factors. Multiplication is commutative, so reversing the two factors does not change the product.
Reasonableness and accuracy checks
- Divide 1,440 by 24; the quotient should be 60.
- Divide 1,440 by 60; the quotient should be 24.
- Estimate using nearby round numbers to catch a misplaced decimal or an extra zero.
A second worked example
What is 24 times 61?
24 × 61 = 1,464
Set up the multiplication: 24 × 61. Multiply the two numbers together. The answer is 1,464. This uses the same method with different numbers, so it shows how the rule transfers instead of only repeating the original answer.
Product insight for 24 × 60
The product is 1,440, which is even because both factors are whole numbers and their parity determines the product. Reversing the factors to 60 × 24 must give exactly the same product, which provides a simple structural check before relying on the result.
Where multiplication is useful
Multiplication handles repeated quantities such as items per pack, hours at a rate, rows and columns, area factors and scaled measurements. A distributive check is especially useful when the factors are large enough that a single mental multiplication is error-prone.
Common mistakes to avoid
- Losing a decimal place when one or both factors contain decimals.
- Adding the factors instead of multiplying them when interpreting repeated groups.
- Skipping a rough magnitude check, which can allow an extra zero or a misplaced decimal to go unnoticed.
Questions about this calculation
Is there another way to check What is 24 times 60?
Split 60 into 50 + 10. Multiplying each part by 24 and adding the partial products is a separate, easy-to-audit route to the same answer. 24 × 50 = 1,200. 24 × 10 = 240. 1,200 + 240 = 1,440.
What is the most common mistake with What is 24 times 60?
Losing a decimal place when one or both factors contain decimals. After correcting that setup, verify the result independently: Check it: 1,440 ÷ 60 = 24, the first number again.
Can I use the same method with different numbers?
Yes. What is 24 times 61? Set up the multiplication: 24 × 61. Multiply the two numbers together. The answer is 1,464. This uses the same method with different numbers, so it shows how the rule transfers instead of only repeating the original answer. The live calculator above lets you replace both inputs and recalculate without changing the underlying method.
How can I tell whether 1,440 is reasonable here?
The product is 1,440, which is even because both factors are whole numbers and their parity determines the product. Reversing the factors to 60 × 24 must give exactly the same product, which provides a simple structural check before relying on the result. Use that scale or ratio check together with the reverse calculation before reusing the result in another calculation.
24 multiplied by other numbers
| Multiplier | 24 × multiplier |
|---|---|
| 1 | 24 |
| 2 | 48 |
| 3 | 72 |
| 4 | 96 |
| 5 | 120 |
| 6 | 144 |
| 8 | 192 |
| 10 | 240 |
| 12 | 288 |
| 60 | 1,440 |